Adding Receiver

I would like to add an additional receiver to OpenSky from the same location. I am testing which setup works best. Can I add it using the same username?

Im am using several receivers with my user name and some of them at the same location. They will obtain different IDs and you can compare them in the ranking.

Do the additional ones show up when you sign in or do you have to add them?

If you are using the dump1090 feeder, you are asked for your username. Then, they will appear under your account.

Thanks again. I am using the dump1090 feeder but I'm using it on a Raspberry Pi that has raspbian with Piaware and dump1090-fa. I'm not sure if that feeder will work with that setup. It looks like it won't because I am not seeing it on "My OpenSky".

Rich

All my feeder are used in combination with dump1090-fa. It works perfectly. Just performed these two steps for installation:
wget opensky-network.org/files/firmware/opens...der_latest_armhf.deb
sudo dpkg -i opensky-feeder_latest_armhf.deb
and entered localhost on port 30005.
Then, statistics appear at opensky-network.org/my-opensky/sensor-profile . The feeder IDs may be negative numbers.

Problem solved. I never noticed the little drop down icon next to the serial number for my original receiver. I clicked on that and lo and behold there was the second receiver number. My bad. Thanks so much for your help.

Rich

Hi all,
I'm new to the opensky network and like to share my data too.
I do run dump1090-mutability on a i386 Linux (Debian) system and wonder if there is also a feeder similar to the armhf available for i386?

Thanks for your responses.
Werner

Here you go: opensky-network.org/community/projects/3...der-debian-gnu-linux